Lviv Centre of Institute of Space Research

Home Up Feedback Contents Search


OLD Product!

horizontal rule


Main features:

bulletHigh resolution and accuracy
bullet Low noise
bullet4 electric + 3 magnetic channels
bulletVery low temporal and thermal drift
bulletLow power consumption
bullet8 Gb SD card
bulletSatellite synchronization
bulletGraphical display
bulletUSB outputs
bulletMagnetic sensor with leveling facilities
bulletWaterproof plastic case


LEMI-420 digital 7-component MTS (three magnetic + four electric channels) is intended for the measurement of natural magnetic and electric field components and their variations in laboratory and field conditions. Its major advantages are very low temporal drift and high accuracy of measurements, what makes it especially efficient for deep sounding application. The magnetometer is produced on the base of flux-gate sensor, all three components of which are implemented in the same housing. The electrometer has four channels with high input resistance, which can operate with any type of measuring electrodes. The electronic unit allows acquisition, processing and storage of data about magnetic and electric fields variations on the SD card and their transmission to the computer via USB interface. Built-in GPS receiver provides satellite synchronization of the internal clock and the coordinates of the MTS location. MTS operation algorithm allows organizing both autonomous and synchronous operation of a set of the MTS installed at the studied area. We are flexible to adopt every parameter to your needs.


Magnetic variations measuring ranges along each component 70 000 nT
Resolution 2 pT
Long-term zero drift < 5 nT/year
Temperature drift < 0.2 nT/C
Transformation factor linearity error < 0.01%
Components orthogonality error < 30 min of arc
Electric voltage total measurement range 2500 mV
Resolution 2 nV
Input resistance 10 GOhm
Sampling rate 1 per s
SD card 8 Gb
Operating temperature range minus 20 to +60 C
Power supply source (10-18) V
Power consumption < 1.2 W
Weight of electronic unit with magnetic sensor 2.7 kg
Length of connecting cable between magnetic sensor and electronic unit up to 10 m

Optional: Cu-CuSO4 electrodes (matched pairs).

View PDF

horizontal rule

Last modified: 20-01-2017

Copyright ISR '2001-2016 TOP HOME